www.supercarsunlimited.com cutlass_and_442
cutlass_and_442
Skip Navigation Links

Manual Transmission Tools

DescriptionPhotosItem NumberPriceQuantity 
Splined Clutch Alignment Tool.
For all applications with 1 1/8" diameter, 10 spline input shafts.

46-020 12.99
Splined Clutch Alignment Tool.
For all applications with 1 1/8" diameter, 26 spline input shafts.

46-022 12.99
Muncie Input Shaft Wrench.
This is the special thin wrench that is required to remove and tighten the main drive gear retaining nut. Replaces GM tool #J-0933-03 and improves on it with a better fit. We also include a new nut to replace ones damaged by not using the proper tool and from being used too many times. (Nut is staked in place after tightening). Fits all Muncie 4 speeds.

Click here for photo 46-122 39.95
      
Oldsmobile Cutlass and Olds 442 Muncie 4 Speed Tools Clutch Alignment Tools